HVAC service · TX
Heating Repair & Furnace Installation in Allen, TX
Furnace and heat-pump repair plus full furnace installation in Allen, TX. Gas and electric systems, ignition and burner service, and replacement units.
(469) 569-6908 Open daily 8am – 10pm
When you need this service
- The furnace runs but the home is not warming up.
- The system short-cycles or will not stay lit.
- A burning or musty smell appears when heat first turns on for the season.
- The blower runs constantly or will not start.
- A carbon-monoxide detector has alerted, or you suspect combustion problems.
- The unit is over fifteen years old and repairs are recurring.
Seeing any of these in your Allen property?
Call (469) 569-6908 to schedule a diagnostic visit. Open daily 8am – 10pm.
Call or text (469) 569-6908What this service covers
Repair, maintenance, and replacement of residential and light-commercial heating systems - gas furnaces, electric furnaces, and heat pumps. Work covers ignition systems, burners, heat exchangers, blower assemblies, and controls.
What's included in the visit
- Diagnostic of ignition system, flame sensor, and gas valve (gas systems)
- Heating-element and sequencer testing (electric systems)
- Heat-exchanger inspection for cracks or corrosion
- Blower motor, capacitor, and limit-switch checks
- Combustion-air and venting inspection
- Replacement system sizing matched to the building when installation is the right path
Answers
Heating Repair & Furnace Installation — questions we hear
My furnace will not turn on. What should I check first?
Confirm the thermostat is set to heat and the setpoint is above room temperature. Check that the furnace switch (often a standard light switch near the unit) is on, the breaker has not tripped, and the air filter is not blocked. If those are all clear, the next step is professional diagnostic.
How long does a furnace last?
Gas furnaces commonly last 15-20 years with regular maintenance. Heat pumps typically last 12-15 years because they run year-round in our climate. Cracked heat exchangers and recurring control failures usually signal end of life.
Why does my furnace smell when I first turn it on for the year?
A short-lived dusty or burning smell during the first heat cycle of the season is normal - dust on the heat exchanger burns off. If the smell persists or smells like rotten eggs (gas), shut the system off and call for service.
Do you install heat pumps as well as gas furnaces?
Yes. We install gas furnaces, electric furnaces, and heat pumps, and can also configure dual-fuel systems that pair a heat pump with a gas furnace for cold-weather backup.
When should I schedule a heating tune-up?
Late summer or early fall, before the first sustained cold front. Catching ignition or heat-exchanger issues before peak demand avoids no-heat calls during a winter storm.
Get help today
Need heating repair & furnace installation in Allen?
Call (469) 569-6908 to schedule. Service across Allen, Plano, McKinney, Frisco, Richardson, Fairview, Lucas.